Buick Encore: Bulb Replacement / License Plate Lamp


To replace one of these bulbs:
- Push the left end of the lamp assembly
toward the right.
- Turn the lamp assembly down to
remove it.
- Turn the bulb socket (1) counterclockwise
to remove it from the lamp assembly (3).
- Pull the bulb (2) straight out of the bulb
socket (1).
- Push the replacement bulb straight into
the bulb socket and turn the bulb socket
clockwise to install it into the lamp
assembly.
- Turn the lamp assembly into the lamp
assembly opening engaging the clip side
first.
- Push on the lamp side opposite the clip
until the lamp assembly snaps into place.
Taillamp Assembly
The vehicle has halogen turn signal lamps
and back-up lamps, LED tail/stoplamps, and
a sidemarker lamp on the taillamp
assembly.
Driver Side
Remove the cover and screws attaching
the panel to the vehicle interior...
Other information:
When the vehicle is shifted into R (Reverse),
the Rear Vision Camera (RVC) displays an
image of the area behind the vehicle in the
infotainment display. The previous screen
displays when the vehicle is shifted out of
R (Reverse) after a short delay...
Speedometer
The speedometer shows the vehicle speed in
kilometers per hour (km/h) and miles per
hour (mph).
Odometer
The odometer shows how far the vehicle has
been driven, in either kilometers or miles.
Trip Odometer
The trip odometer shows how far the
vehicle has been driven since the trip
odometer was last reset...
Categories
If equipped with an anti-theft alarm system,
the indicator light, on the instrument panel
near the windshield, shows the status of the
system.

Off : Alarm system is disarmed.
On Solid : Vehicle is secured during the
delay to arm the system.
Fast Flast : Vehicle is unsecured. A door, the
liftgate, or the hood is open.
read more