Buick Encore: Child Restraints / Top Tether Anchor

Buick Encore 2020-2024 Owner's Manual / Seats and Restraints / Child Restraints / Top Tether Anchor

Buick Encore. Top Tether Anchor

A top tether (3, 4) is used to secure the top of the child restraint to the vehicle. A top tether anchor is built into the vehicle. The top tether attachment hook (2) on the child restraint connects to the top tether anchor in the vehicle in order to reduce the forward movement and rotation of the child restraint during driving or in a crash.

The child restraint may have a single tether (3) or a dual tether (4). Either will have a single attachment hook (2) to secure the top tether to the anchor.

Some child restraints that have a top tether are designed for use with or without the top tether being attached. Others require the top tether always to be attached. In Canada, the law requires that forward-facing child restraints have a top tether, and that the tether be attached. Be sure to read and follow the instructions for your child restraint.

Lower Anchors

Lower anchors (1) are metal bars built into the vehicle. There are two lower anchors for each LATCH seating position that will accommodate a child restraint with lower attachments (2)...

Lower Anchor and Top Tether Anchor Locations

: Seating positions with top tether anchors. : Seating positions with two lower anchors. To assist in locating the lower anchors, each seating position with lower anchors has two labels, near the crease between the seatback and the seat cushion...

Other information:

Buick Encore 2020-2024 Owner's Manual: Tires

Every new GM vehicle has high-quality tires made by a leading tire manufacturer. See the warranty manual for information regarding the tire warranty and where to get service. For additional information refer to the tire manufacturer. Warning Poorly maintained and improperly used tires are dangerous...

Buick Encore 2020-2024 Owner's Manual: Ignition Positions

The vehicle has an electronic keyless ignition with pushbutton start. The RKE transmitter must be in the vehicle for the system to operate. If the vehicle is not working, the vehicle may be near a strong antenna signal causing interference to the Keyless Access system...