Buick Encore: Vehicle Checks / Doing Your Own Service Work

Buick Encore 2020-2025 Owner's Manual / Vehicle Care / Vehicle Checks / Doing Your Own Service Work

Warning

It can be dangerous to work on your vehicle if you do not have the proper knowledge, service manual, tools, or parts. Always follow owner’s manual procedures and consult the service manual for your vehicle before doing any service work.

If doing some of your own service work, use the proper service manual. It tells you much more about how to service the vehicle than this manual can. To order the proper service manual, see Publication Ordering Information.

This vehicle has an airbag system. Before attempting to do your own service work, see Servicing the Airbag-Equipped Vehicle.

If equipped with remote vehicle start, open the hood before performing any service work to prevent remote starting the vehicle accidentally. See Remote Vehicle Start.

Keep a record with all parts receipts and list the mileage and the date of any service work performed. See Maintenance Records.

Caution

Even small amounts of contamination can cause damage to vehicle systems. Do not allow contaminants to contact the fluids, reservoir caps, or dipsticks.

Vehicle Checks

Hood

Warning Turn the vehicle off before opening the hood. If the engine is running with the hood open, you or others could be injured. Warning Components under the hood can get hot from running the engine...

Other information:

Buick Encore 2020-2025 Owner's Manual: Folding the Seatback

Either side of the seatback can be folded down for more cargo space. Fold a seatback only when the vehicle is not moving. Caution Folding a rear seat with the seat belts still fastened may cause damage to the seat or the seat belts. Always unbuckle the seat belts and return them to their normal stowed position before folding a rear seat...

Buick Encore 2020-2025 Owner's Manual: License Plate Lamp

To replace one of these bulbs: Push the left end of the lamp assembly toward the right. Turn the lamp assembly down to remove it. Turn the bulb socket (1) counterclockwise to remove it from the lamp assembly (3). Pull the bulb (2) straight out of the bulb socket (1)...